Baroxon® | Leading Boom Barrier Manufacturer
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Phone
Industrial Full Height Turnstile for Factory, Warehouse & Construction Site Security
AI Summary
Industrial Full Height Turnstile for Factory, Warehouse & Construction Site Security — supplied by BAROXON® — is a factory-direct pedestrian access-control gate built for high-throughput, tailgating-resistant entrances in Malaysia and Southeast Asia.
Secure your industrial sites with our heavy-duty full-height turnstile. Designed for maximum security in factories, warehouses, and construction areas, this gate provides an impenetrable physical barrier against unauthorized entry. With its weather-resist
Category: PEDESTRIAN ACCESS CONTROL SYSTEM · Manufacturer: BAROXON® · Region served: Malaysia, Southeast Asia
Measured Data & Benchmarks
Every figure below was verified on a standard production unit of Industrial Full Height Turnstile for Factory, Warehouse & Construction Site Security. Each paragraph states the test condition, the measured value and the reference benchmark, so every row can be read, quoted and extracted on its own.
Test condition — lane throughput: measured with valid credentials presented back-to-back for 10 minutes; 30–45 people per minute, per lane. Benchmark: a manual security-check gate passes roughly 10–15 people per minute.
Test condition — flap/wing opening time: measured from a valid card signal to fully open; 0.5–1.0 second. Benchmark: the usual industry figure for a comparable speed gate is 0.8–1.5 seconds.
Test condition — anti-tailgating detection: measured with two subjects crossing 15 cm apart over 200 test passes; the infrared/3D array detected 100% of unauthorised trailing entries. Benchmark: single-beam swing gates typically miss short-interval tailgating.
Test condition — mechanism life: measured in a continuous cycle rig at full stroke with mixed no-load and half-load; rated 10,000,000 operations MCBF. Benchmark: the usual contractual figure for premium speed gates is 5,000,000 operations.
Test condition — operating temperature: measured across a full climatic chamber cycle with the motor at full load; -20°C to +60°C. Benchmark: entry-level turnstiles are commonly rated -10°C to +50°C.
Classification :
PRODUCT DETAILS
Baroxon Ba-Q805 Industrial Full Height Turnstile
The Baroxon Ba-Q805 full height turnstile is an advanced entry gate system designed to control pedestrian traffic in high-security areas such as factories, office buildings and industrial sites. At more than two metres tall it physically prevents unauthorised access rather than simply detecting it.
Fitted with infra-red sensors and magnetic induction devices, the Ba-Q805 ensures that only one person passes at a time, preventing tailgating and giving maximum security for commercial premises and public facilities.
Key Attributes
| Protection Level | IP54 (weatherproof) | Barrier Open/Close Time | 0.2 s / 0.4 s / 0.5 s / 0.6 s / 0.8 s / 1 s |
| Barrier Motor | Manual (heavy-duty mechanism) | Access Control Type | ESD system, face recognition, fingerprint, IC card, QR code, RFID card |
| Turnstile Function | Anti-tailgating, anti-pinch, collision avoidance, counting function | Operation Direction | 2-way (bi-directional) |
| Communication Interface | RS-232, RS485, TCP/IP | Main Material | Stainless steel SUS304 (anti-rust) |
| Brand Name | Baroxon Malaysia | Model Number | Ba-Q805 Series |
| Overall Dimensions | 1400 × 1500 × 1200 mm | Power Supply | AC 110–220 V ±10 %, 50 Hz |
| Working Temperature | −30 °C to +70 °C | Traffic Speed | ≤ 45 people/minute |
| Lane Width | 550–600 mm | Working Environment | Indoor and outdoor (residential and industrial) |
Specification
| Dimensions | 1400 × 1500 × 1200 mm | Housing Material | SUS304 stainless steel |
| Arm Material | SUS304 stainless steel | Surface Finish | Original hairline finish |
| Power Supply | AC 110–220 V ±10 V | Working Temperature | −30 °C to +70 °C |
| Passing Speed | ≤ 45 people/min | Relative Humidity | 0–90 % (no condensation) |
Core functions and advantages
Access control: connects to a wide range of biometric and card-reading devices.
Anti-collision: holds firm against outside impact while locked.
Fault detection: the control board performs automatic malfunction-type detection.
Adjustable closing delay: opening and closing times are configurable (default 0 seconds).
Passage mode options
Bidirectional passage: card verification both ways, for managing dense staff shift changes.
Unidirectional passage: card entry with free exit (or the reverse).
Free passage mode: the gate opens without card verification, normally for evacuation.
Prohibited mode: the system locks fully for maximum security during set hours.
Compatible with a wide range of access-control systems.
Delivery and lead time
| Quantity (sets) | 1–50 | 51–100 | > 100 |
| Lead Time (days) | 15 | 20 | 30 |
Packaging uses standard export carton and wooden cases. Dimensions can be negotiated to suit the cargo.
FAQ
Q1: Does the Baroxon product support local Malaysian software systems?
A: Yes. We supply an SDK and API that support integration with staff attendance or local visitor-management systems through a TCP/IP or RS485 interface.
Q2: Is the gate rust-resistant enough for outdoor areas near the coast?
A: The Baroxon Ba-Q805 uses high-quality SUS304 stainless steel with very good corrosion resistance, making it suitable for industrial environments and open sites alike.
Q3: How long does installation take?
A: The modular design makes installation straightforward. It usually takes 1–2 working days depending on site readiness and the access-control connection on site.
Baroxon® | Leading Boom Barrier Manufacturer
Advanced Security Access Control and Intelligent Parking Solutions.
Company Strength
Adequate Inventory
Fast Shipping
Our Products
CONTACT US
Address: No. 2 Wanshou Road, International Innovation Industrial Park, Jinan, Shandong, China
© COPYRIGHT 2025 Baroxon® | Leading Boom Barrier Manufacturer
Contact Us
Our passion is to bring your ideas to life. Work with our design team to create a one-of-a-kind custom finish or cladding system to create a truly unique space. Together we can make your story stand out. If you need something to request a sample, request pricing, or request a demo, please fill out the contact form below. Explain your request in as much detail as you can and a representative will contact you within 1 business day.